MacroSilicon MS7456 Monochrome OSD Generator
The MS7456 is a monochrome on-screen display (OSD) generator from MacroSilicon's FPV product family. It overlays characters, icons and status information on analog video for consumer electronics, analog FPV systems and security-monitoring displays.
The MS7456 accepts CVBS input, supports NTSC/PAL and uses an SPI-compatible serial interface to configure display content. Integrated Flash stores 512 user-defined characters or pictograms, and a character set is preloaded at the factory.
Features and Specifications
| Item | Specification |
|---|---|
| Video input | CVBS, supporting NTSC and PAL |
| Mode detection | NTSC/PAL detection and loss-of-signal (LOS) status detection |
| Character capacity | 512 user-defined characters or pictograms stored in integrated Flash |
| Character dimensions | 12 × 18 pixels |
| Character attributes | Blinking, inverse display and background control |
| Brightness adjustment | Selectable brightness adjustment per row |
| Display capacity | Up to 16 rows × 30 columns; consult the datasheet for available rows in each video standard |
| Sync generator | Timing generated from an internal clock or an external input |
| Video output | PAL and NTSC, with integrated SAG compensation at the output |
| Clock | External 27 MHz crystal input |
| Output signals | LOS, VS, HS and CLOCK |
| Control interface | SPI-compatible serial interface |
| Default character set | Factory preloaded |
| Power supply | Single 3.3 V supply |
| Reset | Low-voltage reset and external reset |
| Package | E-TSSOP28, 9.7 mm × 4.4 mm, plastic encapsulation |
| Environmental compliance | Lead-free and RoHS compliant |
Block Diagram
Applications
- Consumer electronics: menus, device status and operating prompts over analog video.
- Security-monitoring displays: character, icon and monitoring-status overlays.
- Analog FPV video: a flight-controller MCU updates voltage, timers and flight-status characters over SPI.
Comparable Parts and Replacement Evaluation
AT7456E and DP7456 can serve as reference parts when comparing similar OSD applications. For devices listed as “Ruimeng MS7456” (瑞盟 MS7456) in documentation or purchasing records, verify the manufacturer, full part number and datasheet to distinguish them from the MacroSilicon MS7456 covered here.
Comparable application functions do not establish pin, register or electrical compatibility. Before substitution, check supply voltage, package and pinout, the 27 MHz clock, SPI timing, character-memory programming, synchronization and video I/O parameters, then validate on a prototype. MAX7456 application documentation can inform character-based OSD design but is not a specification source for MS7456.
Related Pages
Documentation Notes
This page summarizes the supplied MS7456 product feature information. Use the corresponding revision of MacroSilicon's official datasheet for pin definitions, electrical limits, registers and timing parameters.

